Logo

    Search

    Installation Guides

    Metra Online

    Axxess Interfaces

    OS-BMW4RV2 (00 - 16) | Rear Ceiling & Rear Deck Speakers | Installation Instructions
    OS-BMW4RV2 (00 - 16) | Rear Ceiling & Rear Deck Speakers | Installation Instructions

    OS-BMW4RV2 (00 - 16) | Rear Ceiling & Rear Deck Speakers | Installation Instructions

    image
    image

    Vehicle Applications

    BMW Rear Ceiling Speakers / Rear Deck Speakers

    • (2000-2016)
    image
    ‣
    OS-BMW4RV2 | Vehicle Applications

    ↳ Installation Time

    The
    The estimated installation time for this guide is between one (1) to two (2) hours with a single experienced technician.

    Introduction

    The following instructions will guide you through the installation process to replace the Rear Ceiling Speakers / Rear Deck Speakers into the factory locations of your BMW.

    icon

    TIP Before you begin, review these instructions thoroughly and ensure that all parts are present and tools are available.

    icon

    WARNING Metra Electronics does not assume any responsibility for damage resulting from incorrect installation.

    ↳ Parts List

    Number
    Component
    Quantity
    1
    4” Coaxial Rear Ceiling Speakers (OPTISOUNDBMW4R-V2)
    1

    ↳ Required Tools

    • Panel Tool
    • Ratchet Wrench
    • Torx: T-15, T-20

    Wagon Bodystyle

    Ceiling Speaker Removal

    Follow the instructions below to remove the ceiling speaker.

    1. Open the rear hatch.
    2. Remove the speaker grille using a panel tool.
    image
    1. Remove the two (2) T-15 screws from the speaker plate.
    2. image
    3. Remove the entire speaker plate with the speakers attached.
    4. Unplug the harness from the OE speaker (highlighted below).
    image
    1. Place the speaker plate on the work surface and remove the five (5) T-20 screws to remove the factory speakers from the speaker plate (highlighted below).
    image

    Installation

    Follow the instructions below to install the ceiling speaker.

    1. Attach the included speaker harness to the new speaker.
    image
    1. With the factory speakers removed, install the new speaker into the speaker plate.
    image
    1. Attach the speaker to the speaker plate with the three (3) T-20 screws (highlighted below).
    image
    1. Connect the factory harness to the new speaker harness.
    image
    1. Mount the speaker plate back into location with the two (2) T-15 screws.
    2. image
    3. Reinstall the factory grille.
    image
    icon

    NOTE Repeat the above steps on the opposite side of the vehicle to complete installation.

    image

    Technical Support

    icon

    TIP If you encounter any difficulties during installation please carefully review the instructions and ensure that the installation was performed exactly as instructed.

    Our dedicated team is here to provide you with expert assistance and guidance. Whether you're troubleshooting an installation, seeking product information, or looking for technical advice, we're committed to ensuring your experience with Metra Electronics products is seamless and satisfying.

    icon

    WARNING Before contacting Metra Technical Support, ensure the vehicle is in a ready state to perform troubleshooting steps.

    Contact

    icon
    Email
    icon
    Submit a Support Ticket
    icon
    (386) 257-1187
    icon
    Vehicle Fit Guide

    Hours (EST)

    icon
    Monday-Friday: 9:00 am - 7:00 pm Saturday: 10:00 am - 5:00 pm Sunday: 10:00 am - 4:00 pm
    Metra recommends MECP certified technicians.
    Metra recommends MECP certified technicians.

    On this page

    • Vehicle Applications
    • BMW Rear Ceiling Speakers / Rear Deck Speakers
    • ↳ Installation Time
    • Introduction
    • ↳ Parts List
    • ↳ Required Tools
    • Wagon Bodystyle
    • Ceiling Speaker Removal
    • Installation
    • Technical Support
    • Contact
    • Hours (EST)
    Logo

    Facebook

    Youtube

    Mailing List

    © Metral Electronics, 2024

    YouTubeFacebookRSS