Steering Wheel Controller | Dual Assignment
After the AXSWC interface has been programmed and is fully functional, it can assign two (2) functions to a single button.
Dual Assignment Methods
Dual Assignment can be achieved:
- Following the steps below.
- Through a Windows-based computer using the Axxess Updater.
- Through the Axxess Updater app available from the Android or Apple mobile devices App Stores.
Dual Assignment Procedure
Follow the steps below to dual assign SWC buttons.
- Program the interface to the vehicle following the vehicle-specific document.
- Turn the Radio Off.
- Cycle the key Off, then back On.
- Wait until the light flashes Green one (1) time, then goes out.
- Press and hold the desired SWC button for dual assignment for 10 seconds (or until the light flashes rapidly Green), then release. The light will turn solid Green, indicating the interface is in Dual Assignment mode.
- Reference the Dual Assignment Legend below for assignment function details.
- Press and release Volume Up on the steering wheel the number of times related to the desired feature for a long button press.
- Press and release the SWC button established in Step 5. The LED will go out, indicating the information has been stored in memory.
- Repeat this procedure from Step 5 for each button you wish to dual assign.
Resetting a Dual Assigned Button
To reset an SWC button to its default state:
- Repeat Step 3 and Step 4 above, then:
- Press and release Volume Down on the steering wheel. The LED will turn off, and the dual assignment for that button has been erased.
→ Dual Assignment Legend
Function # | Function |
1 | - |
2 | - |
3 | Seek Up/Next |
4 | Seek Down/Next |
5 | Mode/Source |
6 | Mute |
7 | Preset Up |
8 | Present Down |
9 | Power |
10 | Band |
11 | Play/Enter |
12 | PTT |
13 | On Hook |
14 | Off Hook |
15 | - |
16 | - |
17 | - |
18 | - |
Technical Support
TIP If you encounter any difficulties during installation please carefully review the instructions and ensure that the installation was performed exactly as instructed.
Our dedicated team is here to provide you with expert assistance and guidance. Whether you're troubleshooting an installation, seeking product information, or looking for technical advice, we're committed to ensuring your experience with Metra Electronics products is seamless and satisfying.
WARNING Before contacting Metra Technical Support, ensure the vehicle is in a ready state to perform troubleshooting steps.
Contact
Hours (EST)
On this page
- Steering Wheel Controller | Dual Assignment
- Dual Assignment Methods
- Dual Assignment Procedure
- Resetting a Dual Assigned Button
- → Dual Assignment Legend
- Technical Support
- Contact
- Hours (EST)