AXSWC | Sony Radio Programming Instructions

Download Printable PDF

AXSWC Sony Radio Programming Instructions - PDF.pdf8736.5KB

If using a PC or Mac, follow the Desktop Installation Instructions. If using the App, follow the App Installation instructions. If you cannot access a PC or mobile device, use the General Instructions below.

General Installation Instructions

The radio type can be set using the AXXESS Updater.

Program, the interface to the vehicle using a vehicle specific instructions guide.
Turn the ignition on.

Press and hold Volume Down on the steering wheel until the LED turns solid Red.

Release Volume Down.
Press and hold Volume Up on the steering wheel until the LED turns solid Red.

Repeat Step 5 the number of times that corresponds to your radio number in the table below.

NOTE Example: Repeat Step 5 twenty-two (22) time for an Axxera radio (likely for this installation).

Press and hold Volume Down on the steering wheel until the LED turns solid Red.

Release Volume Down.
Access the Radio Menu.
In General Settings locate the Steering Wheel Control menu.
Change the setting from Preset to Custom.
Press the Wrench icon.
Press and Hold the desired function on the radio menu screen for two (2) seconds, then release. The function box field selected should stay illuminated and white.
Push and hold the corresponding function button on the steering wheel. An orange border will appear around the button in the radio menu if the programming is successful (Figure A).

Figure A

Perform the above instructions for each function you wish to assign.

TIP If a function does not program successfully, change the radio type on the interface to one of the other options bolded in the table below

→ Radio Type Table

Radio #	Radio	Radio #	Radio
1	Eclipse Type 1	13	LG
2	Kenwood	14	PARROT
3	Clarion Type 1	15	XITE
4	Sony/Dual	16	Phillips
5	JVC	17	Kicker
6	Pioneer or Jensen	18	JBL
7	Alpine	19	INSANE
8	Visteon	20	Magnadyne
9	Valor	21	Boss
10	Clarion Type 2	22	Axxera
11	Metra OE	23	Axxera (Type 2)
12	Eclipse (Type 2)	24	Alpine (Type 2)

NOTE To change to one of the above Radio types repeat Steps 2 through 4 above.

Desktop Installation Instructions

Connect the interface and select SWC Configuration.

Click Read from ASWC.

Select Axxerra from the Set Radio Type dropdown.

WARNING Do not select Axxera (Type 2).

Click Write to ASWC.

Return the interface to the vehicle.

WARNING If you have not already done so, refer to the vehicle specific instructions to program the interface before proceeding.

Access the Radio Menu.
In General Settings locate the Steering Wheel Control menu.
Change the setting from Preset to Custom.
Press the Wrench icon.
Press and Hold the desired function on the radio menu screen for two (2) seconds, then release. The function box field selected should stay illuminated and white.
Push and hold the corresponding function button on the steering wheel. An orange border will appear around the button in the radio menu if the programming is successful (Figure A).

Figure A

Perform the above steps for each function you wish to assign.

TIP If a function does not program successfully, change the radio type on the interface to one of the other options bolded in the table below

→ Radio Type Table

Radio #	Radio	Radio #	Radio
1	Eclipse Type 1	13	LG
2	Kenwood	14	PARROT
3	Clarion Type 1	15	XITE
4	Sony/Dual	16	Phillips
5	JVC	17	Kicker
6	Pioneer or Jensen	18	JBL
7	Alpine	19	INSANE
8	Visteon	20	Magnadyne
9	Valor	21	Boss
10	Clarion Type 2	22	Axxera
11	Metra OE	23	Axxera (Type 2)
12	Eclipse (Type 2)	24	Alpine (Type 2)

App Installation Instructions

Connect the interface to your device and click Remap SWC.

Open the Select your Radio Type dropdown.

Select Axxerra from the Select your Radio Type dropdown.

WARNING Do not select Axxera (Type 2).

If the update is successful, an ASWC Settings Saved notification will display on the bottom of the screen.

Return the interface to the vehicle.

WARNING If you have not already done so, refer to the vehicle specific instructions to program the interface before proceeding.

Access the Radio Menu.
In General Settings locate the Steering Wheel Control menu.
Change the setting from Preset to Custom.
Press the Wrench icon.
Press and Hold the desired function on the radio menu screen for two (2) seconds, then release. The function box field selected should stay illuminated and white.
Push and hold the corresponding function button on the steering wheel. An orange border will appear around the button in the radio menu if the programming is successful (Figure A).

Figure A

Perform the above steps for each function you wish to assign.

TIP If a function does not program successfully, change the radio type on the interface to one of the other options bolded in the table below.

→ Radio Type Table

Radio #	Radio	Radio #	Radio
1	Eclipse Type 1	13	LG
2	Kenwood	14	PARROT
3	Clarion Type 1	15	XITE
4	Sony/Dual	16	Phillips
5	JVC	17	Kicker
6	Pioneer or Jensen	18	JBL
7	Alpine	19	INSANE
8	Visteon	20	Magnadyne
9	Valor	21	Boss
10	Clarion Type 2	22	Axxera
11	Metra OE	23	Axxera (Type 2)
12	Eclipse (Type 2)	24	Alpine (Type 2)

Technical Support

TIP If you encounter any difficulties during InInstallation please carefully review the instructions and ensure that the InInstallation was performed exactly as instructed.

Our dedicated team is here to provide you with expert assistance and guidance. Whether you're troubleshooting an installation, seeking product information, or looking for technical advice, we're committed to ensuring your experience with Metra Electronics products is seamless and satisfying.

WARNING Before contacting Metra Technical Support, ensure the vehicle is in a ready state to perform troubleshooting steps.